d&b audiotechnik Q-SUB Manuel - Sayfa 7

Hoparlör Sistemi d&b audiotechnik Q-SUB için çevrimiçi göz atın veya pdf Manuel indirin. d&b audiotechnik Q-SUB 8 sayfaları.

Fig. 6: Q1/Q-SUB Line Array

Fig. 7: Q1/Q-SUB Stack

Fig. 8: Q-SUB with

Z5013 Loudspeaker stand M20 with

winder and Q7

Q-SUB Manual

Q-SUB and Q1 cabinets

NOTICE:

When Q-SUBs are used together with Q1 cabinets in a

flown array, the Q-SUB cabinets MUST be positioned at

the top of the column.

Q1 and Q-SUB cabinets use the same sockets in the front grill and side

panels to accept the Z5153 Locking pin 8 mm.

Located on the top of the side panels of the Q-SUB cabinet is an

additional socket that enables the Q1 cabinet to be tilted downwards up

to 6° for ground stacked use. In this case, the Z5152 Q Front links have

to be rotated through 180° before attachment to allow the Q1 cabinet

to be tilted to the front (see picture below).

↵

180°

Fig. 9: Orientation of Z5152 Q Front links

An M20 threaded flange in the top panel accepts the Z5013

Loudspeaker stand M20 with winder for the deployment of full range

cabinets such as Q7 together with the Z5150 Q Swivel bracket and the

Z5024 High stand adapter.

(2.2 EN)

Page 7 of 8