Ambiano FPD1000 Kullanım Kılavuzu - Sayfa 9
Gıda İşlemcisi Ambiano FPD1000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ambiano FPD1000 16 sayfaları. 3.5l die cast aluminium 1000w power
Ayrıca Ambiano FPD1000 için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Hints and Tips
Chopping
Processing foods that are roughly equal in size will achieve more consistent results.
Using the Feed Tube
For even results when slicing, shredding or grating you must take care when packing the feed
chute. Cut ingredients down to size so they fill the feed chute. This will ensure ingredients do
not shake around while the processing disc is spinning. Always use the food pusher to push
ingredients down.
NOTE: Do not use excessive force to push the ingredients down as this may cause
damage to the food processor.
Soups
If you are processing soups, always allow ingredients to cool to room temperature before
processing.
Mincing
Meat should be cut down into 2-3cm cubes to ensure best results for mincing. It is
recommended to use the pulse function when mincing so the meat is not over processed.
Vegetables & Fruit
When processing vegetables or fruit, remove any pips, skins, cores and chop into quarters or
eighths if applicable to achieve best results.
Dry Ingredients
For best results when using dry ingredients such as flour, add to the bowl before adding
liquid ingredients. You can add the liquids through the feed chute while the food processor is
running. Ensure the food pusher is replaced immediately after adding.
NOTE: When processing wet and dry ingredients you may need to regularly stop the food
processor and scrape down the sides of the bowl using the spatula included.
Repackaging to Prevent Damage in Transport
Please retain all packaging material. This will be required for protection if product needs to
be transported in the future. Ensure the food processor is switched OFF, unplugged at the
power outlet and ensure all parts of the food processor are clean and dry. Place the lid on
top of the processing bowl in UNLOCKED position to avoid strain on the operating and safety
switches. Place the food pusher into position in the feed chute. Place the processing discs in
the included plastic bags and store in a safe place. DO NOT store the discs in a drawer with
other utensils. Always store blades with the included sheaths in place.
AFTER SALES SUPPORT
15
1300 663 907
AUS
16
MODEL: FPD1000 PRODUCT CODE: 9748 07/2019
.
Cleaning & Storage
When finished with the food processor, ensure you unplug from the power point and
clean thoroughly. To clean the base, use a clean moist cloth only and make sure to dry it
afterwards.
To clean the bowl and lid, use warm soapy water with a sponge only. Using a scourer or
abrasive liquid could cause damage to the plastic in the bowl.
NOTE: It is not recommended to put the metal chopping blade or discs into the
dishwasher, as the chemicals may blunt the edges.
NOTE: Bowl may discolour with certain food such as carrots. Wash bowl immediately
after processing high staining foods. Bowl is not dishwasher safe.
The blades, processing discs, disc adaptor and spindle are all dishwasher safe.
Disposal
At the end of its working life, do not throw this product out with your household rubbish.
Electrical and electronic products contain substances that can have a detrimental effect
on the environment and human health if disposed of inappropriately. Observe any
local regulations regarding the disposal of electrical consumer goods and dispose of it
appropriately for recycling. Contact your local authorities for advice on recycling facilities
in your area.
Please keep the original packaging carton and materials in a safe place. It will help to
prevent any damage if the product needs to be transported in the future. In the event it is
to be disposed of, please recycle all packaging material where possible.
If you require another copy of this instruction manual, please visit www.winplus.com.au to
obtain an electronic copy.
Storage and Protection During Intervals in Normal Use
Ensure the food processor is switched OFF. Unplugged at the power outlet and ensure all
parts of the food processor are clean and dry.
Place the lid on top of the processing bowl in UNLOCKED position to avoid strain on the
operating and safety switches. Place the food pusher into position in the feed chute. Place
the processing discs in the included plastic bags and store in a safe place. DO NOT store
the discs in a drawer with other utensils. Always store blades with the included sheaths in
place.
AFTER SALES SUPPORT
1300 663 907
.
AUS
MODEL: FPD1000 PRODUCT CODE: 9748 07/2019