Asko TD70.1 SPO Kurulum Talimatları Kılavuzu - Sayfa 7
Kurutucu Asko TD70.1 SPO için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Asko TD70.1 SPO 12 sayfaları. Domestic vented tumble dryer
Sayfayı Yazdır
Installation instructions
To connect the exhaust duct to a
ventilation outlet, follow the steps
below:
1. Connect the exhaust duct to a ventilation
exhaust fi tting or to a discharge through the
wall.
2. Secure the duct joint to the outlet stub on the
machine.
3. Run the duct with as few bends as possible
to the point of discharge.
Ventilation grill (not supplied with machine)
WARNING!
This appliance shall not be exhausted into
a chimney, a wall, a ceiling, an attic, a crawl
space or a concealed space of a building. Only
a rigid or fl exible metal duct shall be used for
exhausting. Only a metal ventilation grill shall
be used. If the duct is taken to a wall outlet, a
ventilation grill shall be fi tted to prevent reverse
fl ow of cold air. Fit the ventilation grill to the
outside of the wall.
NOTE!
Avoid:
• very long exhausting systems
• too many corners
• tight corners
These reduce effi ciency and increase time and
energy consumption.
Customer Care Center
1-800-898-1879
www.askona.com
7