Ambient Recording Clockit Master Slate ACD101 Manuel - Sayfa 3

Ses ve Video Aksesuarları Ambient Recording Clockit Master Slate ACD101 için çevrimiçi göz atın veya pdf Manuel indirin. Ambient Recording Clockit Master Slate ACD101 5 sayfaları.

Sayfayı Yazdır

Off no charge.

1.4 Brightness Setting

The brightness of the display can be adjusted in 7 steps. One button is held down

while the other is used to change the display brightness. Brightness levels 6 and

7 are only usable on intermittent display, Clapper mode. There is an internal

command to lower brightness level if the display is left on permanently at the very

bright level.As the batteries become empty it can occur that the display flickers. It

has switched automatically to a lower brightness. Change batteries soon. time

has not been lost.

1.5 Generator

Setting the generator by hand is easy and has the following features

*Setting user bits without stopping or changing time

*Setting time and user together with one setting movement

*Setting time without changing user

Switch on, and open the clapper.

SET MODE

Hold down both buttons at once for five seconds to reach set mode,

Left button moves digits up .Hold down left button right button moves digits

down.

Right button moves cursor to the right .hold down right button left button moves

cursor to the left.

The cursor can be moved round a ring with user bits, then one space (POS 9) and

onto time. Moving The cursor out of the time space through pos 9 reaches user

bits again and so on.

In pos 9 the left button can be used to toggle the newly set or old time and user

bits. the one showing in the display will be selected when entering.

USERBIT DESIGNATION

Y: year. M: month. D: day. R: roll. U: unit.

Old

YY MM DD RR

New MM DD UR RR

DD MM YY PP

or AATON

YY MM DD PP

The user bits show with cursor on left digit blinking. Set digits as above.

Newer master slates will show cursor at roll increment position one click and the

roll number will increase.

After user has been set move cursor to pos 9 and toggle old or new user. to

select.