Ambient Technologies WMTD Hızlı Başlangıç Kılavuzu - Sayfa 4

Uzaktan Kumanda Ambient Technologies WMTD için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Ambient Technologies WMTD 10 sayfaları. Wireless wall on/off/timer remote control

Sayfayı Yazdır
Wireless Wall Transmitter:
Installing Wireless Transmitter to Wall:
The wireless transmitter can be installed within a radius of 30 feet with no object in between the line of sight of the
receiver . Choose a mounting location about 5 feet above the floor in an area with good air circulation (preferably
on an inside wall) and away from the following:
1.
Air Ducts
2.
Radiant heat from the sun and appliances
3.
Concealed pipes and chimneys
Installations:
1.
To remove the front housing, slide the side door up.
2.
Press the tab down to disengage it from the front housing.
3.
Align the back housing to the desired location. Mark two (2) holes
using the housing.
4.
Drill two (2) holes and insert the plastic anchors carefully until they
are flush with the wall.
5.
Fasten securely the back housing to the wall with the two (2)
screws.
Installing Batteries:
The wireless transmitter uses two (2) "AAA"- size batteries. To install batteries:
1.
Slide the side door up and remove.
2.
Insert the two (2) batteries into the cavity as indicated on the side of the
transmitter. Make sure the polarity of the battery is correct.
3.
Close the side door until it snaps into the housing.
4.
The batteries should be replaced at least once every 6 months or when low
battery icon come out on the LCD display.
50D0089 Rev 2
Page 4 of 10
Transmitter: - Back Housing
Transmitter: - Batteries Installation
Ambient Technologies
A Division Of MHS