Ambient Weather WS-0802 Kullanıcı Kılavuzu - Sayfa 9
Termometre Ambient Weather WS-0802 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather WS-0802 15 sayfaları. 8-channel wireless thermometer with min/max display
Sayfayı Yazdır
Channel Default Condition HI ALARM (temperature) ºF
1
OFF
2
OFF
5.1.4 Setting the Min and Max Alarm
The high and low alarms can be set for Channels 1 and 2 only. Press the CH/+ button to switch the
display between Channel 1 and 2.
Next, press the SET button once, and the alarm icon will appear:
button for 3 seconds, and the temperature HIGH (max) alarm will flash. Press the CH/+ button to
increase the HIGH alarm and the MIN/MAX button to decrease the HIGH alarm. Press and hold the
+ or - button to change rapidly. While the alarm value is flashing, press and hold the SET button for
three seconds to toggle the alarm on and the alarm off. The alarm icon will appear
disappear when disabled.
Press (do not hold) the SET button again to set the LOW (min) temperature alarm. The LOW alarm
for temperature will flash. Press the CH/+ button to increase the LOW alarm and the MIN/MAX
button to decrease the LOW alarm. Press and hold the + or - button to change rapidly. While the alarm
value is flashing, press and hold the SET button for three seconds to toggle the alarm on and off the
alarm. The alarm icon will appear
5.2 Backlight Operation
To temporarily turn on the back light for five seconds, press the any button on the indoor sensor.
5.3 Manually Reset Max/Min
In normal mode, press the MIN/MAX button once to view the MAX values. Press the MIN/MAX
button again to view the MIN values.
Press the MIN/MAX button again to return to normal mode.
To reset the Max/Min values, press and hold the MIN/MAX- button for 3 seconds.
Note: Default function is Clearing Min/Max Daily.
The minimum and maximum can be set to clear daily (at midnight automatically) or manually. Clears
Daily (
will be displayed)
5.4 Channel Selection
Press the CH/+ button to switch the display between remote sensors 1 through 8, and scroll mode
. In scroll mode, all of detected outdoor sensors will be displayed in five second intervals.
5.5 Sensor Transmission
5.5.1 Sensor Search Mode
If any of the remote sensor communication is lost, dashes (--.-) will be displayed on the screen. To
reacquire the signal:
Version 1.0
©Copyright 2017, Ambient LLC. All Rights Reserved.
100
110
when set, and disappear when disabled.
LOW ALARM (temperature)ºF
60
90
. Press and hold the SET
when set, and
Page 9