Ambient Weather TIDECLOCK-21 Kullanıcı Kılavuzu - Sayfa 2

Saat Ambient Weather TIDECLOCK-21 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather TIDECLOCK-21 5 sayfaları.

1. Introduction

Thank you for your purchase of the Ambient Weather TIDECLOCK-23 4.5" Nautical Brass Quartz

Tide Clock. The following is a guide for preparation, care and operation of your marine weather

instrument.

Note: Some of the images are generic and may not match your exact model.

2. Care and Cleaning

Avoid use of harsh household cleaners and coarse paper towels, which can scratch the bezel or lens.

Fingerprints and dirt may be removed the lenses and bezels with a soft cloth lightly dampened with a

mixture of water and mild dishwashing liquid. Be sure to dry the lens and bezel with a soft cloth

after cleaning.

1. The tide mechanism is on the back of the unit. Insert one AA battery, as shown in Figure 1.

2. Fix the mounting plaque to a wall with a wall mounting hook or nail.

4. Setting the Tide Clock

To set the tide, adjust the tide adjustment wheel in the clockwise direction, as shown in

At the exact high or low tide condition (consult an official tide table, the internet or local authorities),

set the tide pointer to either the high or low tide setting.

NOTE: It is normal for the tide hand to have some "play". This allows for proper rotation of the hand.

You may have to iterate to set properly.

Tide fluctuations (high and low tide) vary from one location to another. The tide hand therefore will

indicate high and low tide at your specific location only. High and low tides have a fluctuation rhythm

Version 1.0

Figure 1

F igure 1.

Page 2