Ambient Weather WeatherMount Kurulum Kılavuzu - Sayfa 2

Raflar ve Standlar Ambient Weather WeatherMount için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Ambient Weather WeatherMount 3 sayfaları.

Important Installation Instructions

CAUTION: Improper installation of the

WeatherMount to your roof top may result in

leaks. We recommend a licensed roofing

specialist for evasive installations.

CAUTION: Any metal object may attract a

lightning strike, including your weather station

and tripod.

Never install your weather station in a

thunderstorm.

We recommend properly grounding the tripod to

avoid extensive damage to the weather station

and structure. Consult a licensed electrician or

local lightning detection expert prior to installing

a ground wire.

WeatherMount Installation

Reference Figure 3. There are three typical

mounting configurations (1) pitched roof

mount (2) flat roof mount (3) gable end

mount (horizontal).

Figure 3

Step 1. Fasten the WeatherMount base to

the building, home or structure (Figure 4).

Use the enclosed lag screws to drill into the

structure. If drilling into a non masonry

structure, use the included tar pad kits (tar

pad kits are not intended to be used when

mounting using the optional accessory

Ubolts).

Ambient Weather

6845 W. Frye Road

Chandler, AZ 85226

TEL 480-346-3380 l FAX 480-346-3381

www.AmbientWeather.com

Step 2: Rotate the base of the pole until

it is vertically level. Use a level to make

certain the top of the mounting pole is

level and tighten the adjustable bracket.

Step 3: Mount the weather station to the

mounting pole. If it is a wireless weather

station, it is recommended the solar

transmitter(s) is facing true south.

Page 2

Figure 4