Ambient Weather RC-6050 ClearView Kullanıcı Kılavuzu - Sayfa 11
Saatli Radyo Ambient Weather RC-6050 ClearView için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather RC-6050 ClearView 13 sayfaları. Clearview am/fm radio controlled projection alarm clock with indoor temperature
6. Specifications
6.1 Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement
Indoor Temperature
6.2 Power Consumption
3 x AA 1.5V Alkaline batteries recommended.
7. Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1. Email Support:
2. Technical Support: 480-346-3380 (M-F 8am to 4pm Arizona Time)
Problem
Radio controlled clock does not update.
The clock is off by increments of an hour.
The clock does not respond to commands.
Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Accuracy
± 2 °F
Solution
Resolution
1 °F
Be patient. Wait at least one week before
contacting Ambient Weather. The RCC is a
shortwave signal originating near Fort Collins,
Colorado, and travels thousands of miles by
bouncing off the ionosphere. The signal is better
at night due to solar interference during the
daytime. The farther you are from Colorado, the
weaker the signal. Urban environments can also
affect the signal strength.
Locate the console at night near a window or
outer wall, and away from other radiating
sources, like wireless routers or TVs. This will
insure the best reception possible.
If running on battery power only, test and
replace the batteries in the clock if
required. Low batteries are often the cause for
weak reception.
Avoid placing the clock on a solid metal plate.
Avoid closed in areas. Closed in areas such as
airports, basements, or industrial buildings are
not recommended.
Press the reset button on the back of the clock.
Check your Time Zone Setting. Make sure
your time zone is set properly in the clock
settings.
Press the reset key on the back of the clock with
an open ended paper clip or sharp tool.
Page 11