Ambir DocketPort 667 Kullanıcı Kılavuzu - Sayfa 6
Tarayıcı Ambir DocketPort 667 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambir DocketPort 667 10 sayfaları. Scans id card and licenses
Sayfayı Yazdır
- 1. User Guide
- 2. CE Conformity and FCC Statement
- 3. Table of Contents
- 4. Introduction to Docketport ® 667 Scanner
- 5. Installation of Software & Hardware
- 6. Uninstall Scanner Driver Software
- 7. Install Scanner Hardware
- 8. Initial Setup with Pagemanager 7
- 9. Performing Scanner Calibration
- 10. Using Your Scanner
- 11. Tips & Cautions
- 12. Product Warranty Information
Install Scanner hardware
a)
Connect the USB cable provided to your computer and scanner.
b)
Make sure the red warning label is removed before connecting this end to your computer.
c)
You may need to reconnect the cable to another USB port on your computer if the scanner
cannot be detected initially. (Check your computer's user guide to identify other available USB
ports and their locations.
Fig. 1
d)
When your software has been installed successfully you will see the following information
displayed from your system tray when you connect the scanner to your computer. (see above)
Fig. 2
- 5 -