Asko D1996FI Planlama ve Tasarım Kılavuzu - Sayfa 11

Mutfak Aletleri Asko D1996FI için çevrimiçi göz atın veya pdf Planlama ve Tasarım Kılavuzu indirin. Asko D1996FI 15 sayfaları. User manual use & care guide general fr (french version)
Ayrıca Asko D1996FI için: Kullanım ve Bakım Kılavuzu (12 sayfalar), Kurulum ve Özelleştirme (4 sayfalar), Planlama ve Tasarım Kılavuzu (19 sayfalar), Kullanım ve Bakım Kılavuzu (12 sayfalar), Kurulum Talimatları Kılavuzu (14 sayfalar), (İspanyolca) Uso Y Cuidado (12 sayfalar), (Fransızca) Manuel D'utilisation Et D'entretien (12 sayfalar)

Sayfayı Yazdır
MODEL D1996SS
UNIT DIMENSIONS
US
Height
32-1/4"–35-1/2"
Width
24"
Depth
23-7/16"*
Depth w/door open
46-1/2"*
Weight
104 lb
FRONT PANELS
Model D1996SS is not designed to accept
a custom front panel. Even though the
controls are on top of the door, this model
installs like a standard ASKO dishwasher. It
fits in American cabinets (4" toe kick) with
a 24" wide opening.
CUTOUT DIMENSIONS
US
Height
32-1/4"–35-1/2"
Width
24"
Depth*
23-7/16"
*This depth allows a 1" (25 mm) space for
the high-loop drain hose.
NOTE: Maintain a 1/8" (3 mm) minimum
clearance between unit and cabinet.
Specifications are subject to change without notice. See installation instructions for additional details.
Metric
819–902 mm
610 mm
596 mm
1181 mm
48 kg
2"
50mm
6-1/4" to 8-1/4"
159-210 mm
Metric
819–902 mm
The electrical and water supplies should
610 mm
enter through the area indicated by the
596 mm
shaded area. Preferably, they should come
through the right side of the machine. The
access hole must be round and smooth
and no bigger than 2" in diameter.
ASKO D
TECHNICAL DATA
Electricity
Water pressure
Heating element
Max loading
46-1/2"*
1181 mm
EASYINSTALL SYSTEM
Every ASKO dishwasher comes with the
unique EasyInstall System that speeds the
installation and reduces problems. This
system has these components which are
approved by regulatory authorities (cUL):
• Over 5' of Pex hose that replaces the
24"
610 mm
• Over 6' of drainhose with an adaptable
• A 6' long electrical cord with standard,
ISHWASHER
120V, 60Hz, 15 amp
18-176 psi
1400 watt
1600 watt
water-inlet copper tubing. It has a 3/8"-
compression fitting that mates with the
shut-off valve.
drain connection.The high loop is built
into this hose on the back of the unit. If
this loop is removed to lengthen the
hose, another high-loop must be built
into the installation somewhere along
the line (typically where the hose passes
through the cabinet).
3-pronged, 110V plug. This eliminates
the need to wire anything under the unit.
11