Asko D1996SS Planlama ve Tasarım Kılavuzu - Sayfa 10

Mutfak Aletleri Asko D1996SS için çevrimiçi göz atın veya pdf Planlama ve Tasarım Kılavuzu indirin. Asko D1996SS 15 sayfaları. Standard dishwashers
Ayrıca Asko D1996SS için: Kullanım ve Bakım Kılavuzu (12 sayfalar), Kurulum ve Özelleştirme (4 sayfalar), Planlama ve Tasarım Kılavuzu (19 sayfalar), Kullanım ve Bakım Kılavuzu (12 sayfalar)

Sayfayı Yazdır

MODEL D1996HNDL

UNIT DIMENSIONS

Height

32-1/4"–35-1/2"

Width

24"

Depth

23-7/16"*

Depth w/door open

46-1/2"*

Weight

104 lb

FRONT PANELS

Model D1996HNDL is not designed to

accept a custom front panel. Even though

the controls are on top of the door, this

model installs like a standard ASKO

dishwasher. It fits in American cabinets

(4" toe kick) with a 24" wide opening.

CUTOUT DIMENSIONS

Height

32-1/4"–35-1/2"

Width

24"

Depth*

23-7/16"

*This depth allows a 1" (25 mm) space for

the high-loop drain hose.

NOTE: Maintain a 1/8" (3 mm) minimum

clearance between unit and cabinet.

Metric

819–902 mm

610 mm

596 mm

1181 mm

48 kg

50mm

6-1/4" to 8-1/4"

159-210 mm

Metric

819–902 mm

The electrical and water supplies should

610 mm

enter through the area indicated by the

596 mm

shaded area. Preferably, they should come

through the right side of the machine. The

access hole must be round and smooth

and no bigger than 2" in diameter.

Specifications are subject to change without notice. See installation instructions for additional details.

ASKO D

TECHNICAL DATA

Electricity

Water pressure

Heating element

Max loading

46-1/2"*

EASYINSTALL SYSTEM

Every ASKO dishwasher comes with the

unique EasyInstall System that speeds the

installation and reduces problems. This

system has these components which are

approved by regulatory authorities (cUL):

• Over 5' of Pex hose that replaces the

24"

610 mm

• Over 6' of drainhose with an adaptable

• A 6' long electrical cord with standard,

ISHWASHER

120V, 60Hz, 15 amp

18-176 psi

1400 watt

1600 watt

water-inlet copper tubing. It has a 3/8"-

compression fitting that mates with the

shut-off valve.

drain connection.The high loop is built

into this hose on the back of the unit. If

this loop is removed to lengthen the

hose, another high-loop must be built

into the installation somewhere along

the line (typically where the hose passes

through the cabinet).

3-pronged, 110V plug. This eliminates

the need to wire anything under the unit.