Ambirad Tornado 600 Kullanım, Bakım ve Servis Kılavuzu - Sayfa 12
Isıtıcı Ambirad Tornado 600 için çevrimiçi göz atın veya pdf Kullanım, Bakım ve Servis Kılavuzu indirin. Ambirad Tornado 600 15 sayfaları. Mobile radiant heater
Sayfayı Yazdır
8 Ducted options
Flue
The products of combustion can be taken away from the room
where the product is being used by the use of a flue duct.
A flue pipe capable of withstanding 175˚C, 108mm diameter, and
maximum length of 10m shall be used.
To keep touch and floor temperatures to an acceptable level,
Ambi-Rad supply a twin wall flue pipe and it is recommended
that such a flue pipe is used. Care must also be also taken by the
user to ensure that any potentially combustible materials do not
come into contact with the flue pipe. Ambi-Rad Flue Duct Kit can
be ordered by quoting part number 200584 and 200601.
The flue pipe provided by Ambi-Rad is in two sections.
Firstly, attach the front flue pipe section to the product by
pushing the flue duct spigot into the flue outlet to ensure that
the spring loaded flap moves through 90˚ to close off the flue
outlet to the axial fan air stream.
Secondly, attach the rear flue pipe section at the end of the front
section as shown above. The securing clip can now be tightened
to keep both section together.
10
MOBILE RADIANT HEATER
Ducted air
In environments where dust, moisture or fumes are present a
ducted air inlet is provided to allow fresh air to be drawn into the
burner to aid combustion and prevent obstruction of the burner
mesh with foreign objects. The tube feeding the ducted air inlet
must be 150mm diameter and maximum length of 10 metres.
Ambi-Rad can supply the tube and ducted air spigot by quoting
part no 200585.
To fit the ducted air tube assembly push the spigot into the
turbulator recess on the side of the product.
Air delivery duct
A 450mm air delivery duct can be fitted to the outlet spinning as
shown. A material capable of withstanding 120˚C must be used.
Ambi-Rad can supply the air delivery duct and attachment clip on
request. If the Ambi-Rad outlet duct is used, ensure that the
green end is fitted to the spinning. Ambi-Rad air delivery duct kit
can be ordered by quoting part no 200586.