AMC MA 30 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач AMC MA 30. AMC MA 30 5 сторінок.

Power Source

The amplifier is fixed at 115V AC or 230V AC. It depends on the territory main voltage.

Battery Connection (12Vdc)

When using external batteries, earth the amplifier via the screw terminal because of present high

voltage. Electrical stability of the system will be improved by providing a good earth ground. NOTE:

the connection cable must be fitted with an in-line fuse - quick blow type 5A (60V). When connecting

batteries please check for correct polarity.

Mains Connection

Microphone Connection

Mic1 is XLR balanced Jack, while Mic2-3 inputs are unbalanced 6.3mm phono jack.

Microphone Connection

Mic1~5 inputs are balanced standard XLR Jack,

rear panel. Mic1 input has VOX priority which

will override Channel 3 to 6 and Line input

signals, channel 2 will not be overridden.

Mic1 input has VOX priority over all other inputs.

Line (Aux/CD) Connection

The equipment provides 3 auxiliary inputs, which may be used for connecting other signal sources

such as a Radio Tuner, CD or Cassette player. The Aux input sockets are standard stereo RCA Jack. The

line level Control on the front panel operates on each of the input sources.

RCA plug connections

Sleeve-Screen

Pin- Signal

SLEEVE

For 100V or 70V Line Loudspeaker

Please use only one 100V or 70V (Selectable) Line Loudspeakers

For Low Impedance 8 or (4 ):

This output allows connection of standard low impedance loudspeakers. The minimum impedance

must be 4Ω. When two or more loudspeakers are in use, ensure that they are wired in such a way that

the impedance load is between 4Ω and 16Ω.