AMC iMic W Series Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофонна система AMC iMic W Series. AMC iMic W Series 8 сторінок. Uhf wireless system
Друкувати сторінкуReceiver setup
•
Put iMic W receiver on a table or other horizontal surface.( iMic receiver can also be rack
mounted, using one of the Rack Mount Kits).
•
Do not place the iMic W receiver near digitally controlled equipment.
•
Plug the DC power supply into the power connector on the back of the receiver. Connect
the other end of the power supply into an electrical outlet.
•
Attach the A and B antennas to the ANTENNA connectors.
•
Connect audio cable from the audio output(s) to the audio input(s) of your audio system,
mixer and/or amplifier.
•
Turn on the receiver by pressing the power button.
Handheld microphone setup
•
Open the battery cover and insert 2AA alkaline batteries.
•
Slide the transmitter ON/MUTE/OFF switch to the ON position. The power LED will glow for
the moment.
•
Slide the transmitter ON/MUTE/OF switch to the MUTE position, if the wireless system
should be used in silent mode. Please note that the microphone is still consuming power
when it is muted.
•
If the battery indicator lamp is shining, it shows that the battery is low and needs to be
replaced.
•
After finished using the transmitter, switch off the power source. Remove the batteries
when storing for long time.