amc VIBRO AVM 1002D Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади amc VIBRO AVM 1002D. amc VIBRO AVM 1002D 14 сторінок. Vibration monitoring system with relay outputs
Друкувати сторінку
1. Introduction
AV MONITOR 1002D
machinery with constant and variable rotational speed.
The features of AVM 1002D are as follow:
®
ICP
(IEPE) standard accelerometer input,
»
4..20 mA output proportional to signal estimate,
»
vibration velocity or acceleration measurement,
»
calculation of RMS or 0-PEAK values,
»
configurable warning and alarm relay outputs, with the delay of the output,
»
build-in connector for AC voltage signal from the vibration sensor (10 V
»
DIN rail mounting.
»
The AVM 1002D system is a perfect solution for automated protection systems of rotating machines.
The device can be integrated with the controller via the 4..20 mA current output. The 10 V
output allows to control the vibration level using a portable vibration analyzer. In addition, the relay
outputs can be used as safety features. If alarm level is exceeded, AVM 1002D module can turn off the
unit before critical damage occurs.
3
(AVM 1002D) is a universal module for condition monitoring of rotating
),
pp
AC voltage
pp
AV MONITOR 1002D