FLO-DYNAMICS VacFill3 Посібник - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник для Сервісне обладнання FLO-DYNAMICS VacFill3. FLO-DYNAMICS VacFill3 20 сторінок.

11. Wait until no more waste fluid is being removed.

12. Turn Right Dial to desired fluid type to fill the radiator making sure you don't break the

vacuum seal between the rubber cone & the radiator.

13. Turn Left Dial to "Air Off" position after fluid is removed.

14. Wait until new fluid stops entering radiator & remove Cone Adapter.

15. Top off radiator if needed.

16. Refill overflow bottle & replace radiator cap.

DRAIN TANKS PROCEDURE:

DRAIN WASTE TANK

1. Turn Right Dial to "Vacuum/Drain Waste" position.

2. Attach Wand Adapter to service hose.

3. Turn Overflow Valve on back of machine to "Drain Waste Tank Position".

4. Open Ball Valve on service hose and place into waste container.

5. Turn Left Dial to "Air On" position to drain waste tank.

6. When finished draining, remove service hose from waste container, and close Ball Valve.

7. Turn Left Dial to "Air Off" position.

8. Turn Overflow Valve on back of machine to "Normal Service Position" to release air

pressure from waste fluid tank.

NOTE: Coolant may splash out while air pressure is being released. Keep hands and

face away from the overflow bottle.