AMCON EQ-6002 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Проектор AMCON EQ-6002. AMCON EQ-6002 12 сторінок. Automatic chart projector

Automatic Chart Projector - EQ-6002

________________________________________________________________

1. Introduction

Thank you for purchasing the Amcon Automatic Chart Projector. Please read

this instruction manual and keep it in a convenient location for future reference.

The remote controlled Amcon Automatic Chart Projector is used to test visual

acuity. The Amcon Automatic Chart Projector provides operational convenience

in a high quality instrument.

To ensure safe usage of this product, it is important that you follow the

instructions in this manual as well as the warning notices on the instrument.

• Do not look directly into the projector lens during operation. The intense

light beam may be harmful to your eyes.

• To avoid damage, always place this device on a stable stand. This

instrument is not designed to sustain rough treatment or falls.

• To reduce the risk of electric shock, do not disassemble this projector.

Take it to a qualified technician when service or repair is required.

Incorrect reassembly can cause malfunction of the projector or electric

shock when the appliance is subsequently used.

• Never attempt to replace the bulb or any electronic component unless the

instrument is unplugged from the power source.

Always open the lens shutter or remove the lens cap prior to turning on

•

the projector lamp.

• Avoid placing this projector in the following environments:

o Poorly ventilated or confined locations. Place at least 2 inches (5

cm) from walls and allow free flow of air around the projector.

o Locations where temperatures may become excessively high, over

90° F (32° C).

o Locations with excessive humidity, dust, or cigarette smoke.

• Do not place any objects on projector.

• Avoid placing liquids near the projector. If the projector does become wet,

immediately disconnect it from the power source.