Amcor HD220H Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Осушувач повітря Amcor HD220H. Amcor HD220H 8 сторінок. Dehumidifier

CONTROLS

Parts identiﬁcation

1. Power ON/OFF indicator light

2. Water tank full indicator – when lit, tank may be full or incorrectly positioned

3. Humidistat selector knob

Function: Controls room relative humidity between 40 % - 80 %.

(When the relative humidity in a room is lower than the selected humidity, the compressor

will stop running.)

4. Power ON/OFF switch & Fan speed selector switch OFF/LO/HI/HEAT

Functions: Sets operating condition of unit as below.

OFF

Unit is off. There is no moisture removal activity.

Unit works only as dehumidiﬁer at low fan speed (quieter operation).

Unit works only as dehumidiﬁer at high fan speed (quicker moisture removal).

HEATER

Unit works with the 800W HEATER ONLY when the humidistat 3 is turned

fully clockwise.

For the DEHUMIDIFIER and 800W HEATER to WORK TOGETHER

when dehumidiﬁcation is required, choose the heat mode with knob 4 and

turn the humidistat 3 to the preferred humidity setting.

When the heater is running by default the fan will always run at high speed.

PLEASE NOTE

When the unit is running in Lo, Hi or Heat mode the fan will always run – even if the

compressor switches off as the unit achieves the desired humidity level.

To switch off the fan turn knob 4 to the OFF position

SAFETY WARNING:

Do not dry clothes on the unit or too close to it when the heater is in operation.