Amcrest IP4M-1062EW-AI Посібник із швидкого старту - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Камера спостереження Amcrest IP4M-1062EW-AI. Amcrest IP4M-1062EW-AI 13 сторінок.
Друкувати сторінку
Welcome
Thank you for purchasing an Amcrest LPR camera!
This document provides a quick setup and overview of your device and its features. For access
to a full user manual or further information regarding your device please visit:
http://amcrest.com/support
Important Safeguards and Warnings
●
All installation and operations of the device should conform to your local electrical safety
codes.
●
We assume no liability or responsibility for any of the fires or electrical shocks caused by
improper handling or installation.
●
We are not liable for any problems caused by unauthorized modifications or attempted
repair.
●
Handle with care, avoid from dropping or placing the device in unsecure areas.
Overview
This fixed lens license plate reader camera provides an optimal solution for surveying areas with
high amounts of traffic and license plate information retention. The camera offers a super wide
0.39" ~ 1.97" (10mm ~ 50mm) lens which provides a full 40° (W) ~ 9° (T) viewing angle. The
camera features full color night vision with the use of 6 individual white light LEDs to illuminate
the area at night. The camera can detect and capture license plate information from up to 98ft,
both day and night to provide 24-hour license plate detection surveillance.
The camera requires a PoE+ connection. This connection provides both power and data to the
camera using a PoE+ compatible switch.
Installation
Before setting up your camera, please ensure the installation surface can support at least 3 times
the weight of the camera.
MicroSD Card Installation
The camera is compatible with up to a 256GB microSD card. Please make sure the microSD
card is rated class 10 or above and properly formatted before installing into the camera.
Use the included torx wrench to remove the
bottom panel.
Insert the microSD card into the microSD
card slot of the camera and secure the back
panel back onto the camera using the
included torx wrench.
3