Amcrest AM-GL300 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для GPS Amcrest AM-GL300. Amcrest AM-GL300 19 сторінок.

AM-GL300 Diagram

Note: The SIM card comes preinstalled in the device. Please do not remove or replace it. If you experience a problem you believe

may be related to the preinstalled SIM card, please contact support.

Charging the Device

To charge the AM-GL300, lift the flap covering the charging post and plug the charger cable end into the unit via the USB port, then

plug the charger into a wall outlet.

The battery LED light on the front of the GPS tracker will hold a constant red light when charging, and the LED in the center will blink

green periodically to indicate that it still has power. If the battery LED flashes red, that means the battery level is low, and the GPS

tracker should be charged.

AM-GL300 Power On/Off

To turn the device on, press the Power button on the top of the device once. As the device obtains a cellular signal, the middle LED

will begin blinking and will start relaying location data. To turn off the device, press and hold the Power button on the top of the

device. The left-most LED light on the device is flashing blue, your tracker is trying to locate a cellular signal over which to send data.