AMD 790GX Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата AMD 790GX. AMD 790GX 20 сторінок.

(7) Primary IDE Connector (40-pin block): IDE1

This connector supports the provided IDE hard disk ribbon cable. After connecting the

single plug end to motherboard, connect the two plugs at other end to your hard

disk(s). If you install two hard disks, you must configure the second drive to Slave

mode by setting its jumpers accordingly. Please refer to the documentation of your

hard disk for the jumper settings.

 Two hard disks can be connected to each connector. The first HDD is referred to

as the "Master" and the second HDD is referred to as the "Slave".

 For performance issues, we strongly suggest you don‟t install a CD-ROM or

DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the system

performance on this channel may drop.

(8) Serial-ATAII Port connector: SATA1~SATA6

This connector supports the provided Serial ATA2 IDE hard disk cable to

connecting the motherboard with serial ATAII hard disk.

(9) D-Sub 15-pin Connector: VGA

VGA connector is the 15-pin D-subminiature female connector; it is for the

display devices, such as the CRT monitor, LCD monitor and so on.

(10) Digital Visual Interface: DVI1

This interface standard designed to maximize the visual quality of digital display

devices such as flat panel LCD computer displays and digital projectors.

(11) SPDIF Out connectors: SPDIF_OUT1

The SPDIF output is capable of providing digital audio to external speakers or

compressed AC3 data to an external Dolby digital decoder. Use this feature only

when your stereo system has digital input function.

IDE1

Pin 1

IDE Connector

S A T A 5

S A T A 3

S A T A 1

S e r i a l -A T A 2 P o r t C o n n e c t o r

10 10

S A T A 6

S A T A 4

S A T A 2