AMD A75 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата AMD A75. AMD A75 20 сторінок. Chipset based m/b for socket fm1 amd processor

Друкувати сторінку

4. Open the socket by

pulling the level

sideways away from the

socket and then upwards

to a 90-degree angle.

2-4

Memory Installation

This motherboard provides two 240-pin DDR III SDRAM DUAL INLINE MEMORY

MODULES (DIMM) socket for DDRIII memory expansion to maximum memory

volume of 8GB.

Valid Memory Configuration

Bank

DIMM1

DDR III 800/1066/1333/1600/1866

DIMM2

DDR III 800/1066/1333/1600/1866

Total

Recommend DIMM Module Combination

One DIMM Memory Module ----Plug in DIMM 1.

Two DIMM Memory Modules---Plug in DIMM1 and DIMM2 for Dual channel

function.

Dual channel Limited!

1. Dual channel function only supports when 2 memory modules pluged in both

DIMMI1 & DIMM 2.

2. Memory modules plugged in DIMMI1 & DIMM 2 must be of the same type, same

size, and same frequency for dual channel function.

Install DDRIII modules to your motherboard is not difficult, you can refer to figure

below to see how to install DDRIII 800/1066/ 1333/1600/1866 SDRAM module.

5. Insert compatible APU

into APU socket and see

to it that APU Pin-1

should be matched into

APU socket Pin-1 during

installation.

240-Pin DIMM

System Memory (Max.4GB)

6. Put the level to the

original place of the

socket. Make sure that

the notched corner

should point towards

the end of the level.

PCS

Maximum Capacity

4 GB

4GB

8GB