cnsat Smart Antenna Selector Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Контролер cnsat Smart Antenna Selector. cnsat Smart Antenna Selector 15 сторінок.
Також для cnsat Smart Antenna Selector: Інструкція з експлуатації (14 сторінок)
Друкувати сторінкуIf you want to force the system to have antenna B always active press B button on
front panel.
You will find the following LEDs configuration:
Is important to underline the difference between manual and auto mode.
If you cannot see the AUTO button illuminated means that somebody pressed A or B
button to force the system to one of the antennas.
In this mode (AUTO LED off),the system will not switch between antennas even if
one is better than the other.
Press A or B in SMART mode only if you have steady heading (moored or at anchor
with no wind/marine flow) to avoid ontinuous switching and you are sure that the
antenna you want to use is the best one.
If you try to press A or B or AUTO button in DIRECT mode you will not find any
reactions, because it's a separate condition and the buttons mentioned before are
useful only in SMART mode.
In SMART/AUTO mode sometimes you will find the system switching from antenna A