AME 14425 Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Валети. AME 14425. AME 14425 4 сторінки. 12 ton heavy duty jack stands

completely and familiarize yourself thoroughly with the product

and the hazards associated with its improper use.

4. Insert roll pin into the bottom hole of the extension tube to

prevent inadvertent loss of the extension tube. Usually it is

pre-installed.

5. Always check the vehicle owner or service manual for location

kg)

of proper lift and support points.

OPERATION

rating

IMPORTANT! Rated capacity is per pair. Use Only one pair per

vehicle. No alterations shall be made to this device. Do not use

adapters or accessories on the saddle or base frame.

1. Adjust saddle height by pulling up the extension tube, then

insert the tube support bar through the hole on extension tube.

only.

2. Ensure that support bar is secure before loading. Insert

support bar into the extension tube far enough to create equal

ort both

distance of bar extending from the extension tube on both

sides.

3. Carefully position stands so that load is centered on stand's

njury or

saddle.

4. Slowly lower the vehicle onto the stands.

5. Check o ensure that vehicle is secure before working on,

around or under. When used to support vehicle, use wheel

chocks to prevent inadvertent movement.

ken or

To lower load

e freely.

IMPORTANT: Be sure all tools and personnel are clear before

ble.

lowering load.

AME INTERNATIONAL

INSTRUCTION MANUAL

2347 Circuit Way, Brooksville, Florida, USA 34604

Phone: (+1) 352-799-1111

- 4 -

Fax: (+1) 352-799-1112

Toll Phone: (+1) 877-775-4AME (4263)

WWW.AMEINTL.NET