AME Intl. 13155 Посібник з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підйомні системи AME Intl. 13155. AME Intl. 13155 5 сторінок. 100 ton aluminum cylinder with locking collar

Друкувати сторінку

steel or wood those are capable of supporting the load.



Please install pressure gauge in the system to monitor the operating pressure. The gauge

must have same pressure rating as the pump and cylinder in the system. The wrong gauge

may cause equipment failure and possible personal injury.



Please carefully inspect the cylinder and coupler before use cylinder or shift coupler. NEVER

connect the cylinder with damaged coupler or damaged port threads. The damaged coupler

or damaged port thread may cause equipment failure and possible personal injury.



Change coupler in a clean place; prevent dirt or other debris from entering into cylinder body

or tube. Dirt or other debris will damage the cylinder and result in equipment failure and

possible personal injury.



Before removing or tightening hose or coupler, fully release the hydraulic pressure in

system.



Never handle pressurized hoses; escaping oil under high pressure can penetrate the skin,

causing serious injury. Seek medical aid immediately if injured.



Please use AME International oil or other approved hydraulic oil.



For hydraulic technical help or repair service. Please contact the authorized AME International

Service Center in your area. AME International has no obligations under any warranty with

respect to products that have been repaired by unauthorized personnel, modified, or damaged

through misuse, abuse, accident, neglect, or mishandling.

IMPORTANT



Please keep the cylinder clean all the time.



To reduce cylinder offset loading, optional ST-series tilt saddles are available. Always use

grease underneath tilt saddles.



Keep hydraulic equipment away from flames and heat, Overheating will soften seals and

weakens hose materials, resulting in oil leaking or other equipment failure. Do not use

equipment in temperatures of 65 ℃ (150℉) or higher.



When the cylinder is not in use, please keep the piston rod fully retracts, remove hose and

use rubber cap to cover the coupler.



Please do not drop heavy duty on hose.



Before load, Please fix a saddle into piston rod, saddle will protect the piston rod.

2. DESCRIPTION

13155 Aluminum Lock Nut Cylinders are Single-acting, low weight and spring return with a stop

ring for stroke restriction. 13155 cylinders are provided with a fully threaded piston rod and a

safety lock nut for positive load holding operations.

AME INTERNATIONAL