CO2 Meter CM-1650 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Вимірювальні прилади CO2 Meter CM-1650. CO2 Meter CM-1650 2 сторінки. Portable co2 welding gas analyzer
Також для CO2 Meter CM-1650: Посібник з експлуатації (15 сторінок)
Друкувати сторінку
Symptom / Issue
Device does not power ON
Slow Response
Reading Error
Red SD Card Icon Appears
LCD Display Turns Off
During Measurements
LCD Screen Troubleshooting
During Use
TROUBLE
SHOOTING:
CM-1650 PORTABLE CO2
WELDING GAS ANALYZER
Possible Cause / Resolution
Make sure the power supply is connected properly and that there is
power from the outlet.
Ensure the device's internal batteries are charged.
Check the air flow channels to make sure they are not obstructed.
Ensure that the Inlet/Outlet Luer Cap Fittings are removed to enable an
accurate means of sampling.
This indicates that the SD Card is either damaged, missing, or full of
data. Replace SD Card.
Reference the "settings" section to adjust back light / auto power off
from default settings.
If the user experiences issues with the screen orientation, this setting
can be changed by referencing the "settings" section and adjusting the
"screen auto rotate" to "NO".