Ameda Platinum Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Молоковідсмоктувач Ameda Platinum. Ameda Platinum 2 сторінки. Multi-user breast pump with hygienikit milk collection system featuring proven airlock protection to help protect breast milk, kit tubing and the pump

Ameda Platinum Посібник із швидкого старту
Platinum
GETTING STARTED
Adapter
1
Silicone Diaphragm
Breast Flange
Tubing
Valve
Tubing
Adapter
Bottle
• If sterile, use immediately (kit is
preassembled)
• If not sterile, clean and assemble
the kit (refer back page of this
Quick Card Guide).
To Simulate Let-Down
5
To mimic a baby's sucking to start milk flow:
• Push suction button up to your highest
comfortable level.
• Try starting at 10% and gradually continue to
increase suction level to arrive at your highest
comfortable level.
IMPORTANT: Only use an Ameda HygeniKit
Milk Collection Kit. Consult you healthcare
provider on pumping session
time.
Quick Start Guide
®
before beginning, wash hands
2
• Insert tubing adapter.
Expressing Milk
6
To mimic a baby's changing pattern to slow, deep
draws or sucks:
• Once milk flows:
- Push speed button down to a slower speed to help
drain milk.
- Try slowing speed to 50-60 cycles per minute. You
can lower speed further if that's more comfortable.
- Continue to adjust suction as needed to arrive at
your highest comfortable level to drain milk.
Ameda Platinum® Multi-User Breast Pump with HygieniKit™ Milk
Collection System featuring Proven Airlock Protection™ to help protect
breast milk, kit tubing and the pump.
3
• Center flange on breast
to create seal.
• Refer to back page of this Quick
Card Guide for proper flange fit.
7
When milk flow slows, try for
another let-down:
*Larkin, et al., Examining the Use and Outcomes of a New Hospital-Grade Breast Pump in
Exclusively Pumping NICU Mothers. Adv. Neo Care 2013;13(1):75-82.
4
• Push On button.
• Speed starts automatically
at 80 cycles per minute.
• Suction starts at the lowest
setting at 1%.
Multiple Let-Downs
- Increase speed back to
80* cycles per minute.
- Adjust suction to your
highest comfortable level.
- Once milk flows again, lower
speed to help drain milk.