Acer AC713 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Acer AC713. Acer AC713 13 сторінок. Acer ac713: user guide
Друкувати сторінку
- 1. Table of Contents
- 2. Packing List
- 3. Precautions
- 4. Installation Instructions
- 4. Swivel Base
- 4. Power Cord
- 4. Video Cable
- 5. Operating Instructions
- 5. General Instructions
- 5. Front Panel Control
- 5. How to Adjust a Setting
- 5. Adjusting the Picture
- 6. Plug and Play
- 7. Technical Support (FAQ)
- 8. Appendix A - Specifications
- 9. Appendix B - Factory Preset Timing Table
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF
THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS
MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO
INPUT SIGNAL.
This monitor meets the Green Monitor standards as set by the Video
Electronics Standards Association (VESA) and/or the United States
Environmental Protection Agency (EPA) and The Swedish Confederation
Employees ( NUTEK ). This feature is designed to conserve electrical energy
by reducing power consumption when there is no video input signal present.
When there is no video input signal this monitor, following a time-out period,
will automatically switch to an OFF mode. This reduces the monitor's
internal power supply consumption. After the video input signal is restored,
full power is restored and the display is automatically redrawn. The
appearance is similar to a "Screen Saver" feature except the display is
completely off. The display is restored by pressing a key on the keyboard, or
clicking the mouse.
Plug and play
Plug & Play DDC1/2B Feature
This monitor is equipped with VESA DDC1/2B capabilities according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of
its identity and, depending on the level of DDC used, communicate
additional information about its display capabilities. The communication
channel is defined in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that
continuously transmits EDID information. The DDC2B is a bidirectional data
channel based on the I²C protocol. The host can request EDID information
over the DDC2B channel.
Video Cable Pin Assignments:
1. Red
5. Ground
2. Green
6. R-Ground
3. Blue
7. G-Ground
4. Ground
8. B-Ground
41A749-786-1A 英文
9. NC
13. H-sync
10. Ground
14. V- sync / * VCLK
11. Monitor Ground
15. DDC-Serial Clock
12. DDC-Serial Data
* FOR DDC
9