Canon 3807B007 Посібник з налаштування - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з налаштування для Принтер Canon 3807B007. Canon 3807B007 12 сторінок. Large-format printers
Також для Canon 3807B007: Базовий посібник (20 сторінок), Базовий посібник (48 сторінок)

Друкувати сторінку

Available printers are listed in the Search Results window.

Select a printer from the list on either their IPv4 Devices or IPv6

Devices tabs and click Next.

In the Method of Configuring IP Addresses window, enter the IP

address in Configure manually, under Method of Configuring

IP Addresses. Click Install to start the installation process. Also

enter your preferred name for the printer in Device Name and the

installation location in Printer Location under Information About

Printer to Configure, as desired.

The installation process begins.

After reviewing the installation results in

the Complete Installation window, click

Next.

When the printer cannot be found on the network

If your printer cannot be found when connecting to

the network for the first time, setup an IP address

for the printer and then configure it on the printer.

When ink fills the system for the first time, after

printhead adjustment is finished, specify the IP

address on the printer's control panel.

• When ink fills the system for the first time,

do not operate the printer until printhead

adjustment is finished.

Enter the IP address. Navigate through

the following menus using the ▲ and ▼

keys on the control panel.

1. Select IPv4 and press OK.

2. Select IPv4 Settings and press OK.

3. Select IP Address and press OK.

4. Enter the IP address.

• The IPv6 Devices tab is displayed in Windows 7, Windows Vista, and

MEMO

• If the printer you want to use is not displayed in the list on the IPv6

• If the printer you want to use is not displayed in the list of printers on

• If you use a DHCP server for automatic assignment of the printer's IP

• Configure the setting for dynamic DNS updating

• Configure the setting for assignment of the same IP address each time

In the Finish window, select Restart my

computer now and click Restart.

On the tab selection screen of the control

panel, press the

and

(settings/adj. tab) and press OK.

No Paper Loaded

OK:Setting/Adj. Menu

Maint. cart.

Remaining Amount

How to enter IP addresses

1. Press the

and

keys to select a

MEMO

field for inputting values.

2. Use the ▲ and ▼ keys to input values.

• Pressing ▲ increases the value by

one.

• Pressing ▼ decreases the value by

one.

• Holding down either the ▲ or ▼ keys

continually increases or decreases

the value.

3. Press OK once you have finished.

Windows Server 2008.

Devices tab, connect via IPv4 instead.

the IPv4 Devices tab, refer to "When the printer cannot be found on the

network" on page 7 to setup and configure an IP address for the printer.

address, printing may no longer be possible after the printer is turned off

and on. This is because a different IP address has been assigned. When

using DHCP server functions, consult your network administrator and

configure the settings in one of the following ways:

In the printer menu, either set DNS Dync update to On, or activate the

setting Enable DNS Dynamic Update in RemoteUI.

(→"Menu Settings", User Manual)

(→"Configuring the Printer's TCP/IP Network Settings", User Manual)

the printer starts up

The printer driver settings take effect after

the computer restarts. This completes

printer driver installation.

An iPFxxxx Support desktop icon

is created after installation. (iPFxxxx

represents the printer model.)

Next, follow steps 12-16 on pages

5-6 to install the User Manual.

Use the ▲ and ▼ keys to select Interface

keys to select

Setup and press OK.

Use the ▲ and ▼ keys to select TCP/IP

and press OK.

Press Menu.

Press OK on the registration confirmation

message that appears.

The IP address is set on the printer.

Next, restart installation of the printer

driver.

In the Search Results window, select

Specify the IP address of available

printers in the network and click Next.

The IP Address Specification window

appears. Follow steps 8-11 on page 9 to

finish installing the printer driver.