Canon 8517A001AA Спрощений посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Спрощений посібник для Принтер Canon 8517A001AA. Canon 8517A001AA 14 сторінок.

Друкувати сторінку

4.2. Service mode operation procedures

1) Close the access cover, and turn off the printer. While pressing the Resume/Cancel button, press and

hold the Power button. (The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button.

3) While holding the Power button, press the Resume/Cancel button 2 times, and then release the Power

and Resume/Cancel buttons. (In the operation panel, "02" will be displayed. Each time the

Resume/Cancel button is pressed, the LED lights alternately in either orange or green. During

initialization, the LED blinks in green.)

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the specified number

of time(s) according to the function listed in the table below. (Each time the Resume/Cancel button is

pressed, the LED lights alternately in either orange or green.)

Time(s)

LED

0 times Green

Power off

1 time

Orange Service test print

2 times Green

EEPROM information print

3 times Orange EEPROM initialization

4 times Green

Waste ink counter resetting

5 times Orange Destination settings

6 times Green

Print head deep cleaning

7 times Orange Not used in servicing

8 times

Green

Return to the menu selection

or more

5) After the function (menu) is selected, press the Power button. The LED lights in green, and the selected

function is performed. (When the operation completes, the printer returns to step 4) above.)

6) Press the Resume/Cancel button the specified number of time(s) according to the destination listed in

the table below, and then the Power button.

Time(s)

LED

1 time

Orange

2 times

Green

Function

Destination

Overseas:

i450

Japan:

PIXUS 450i

When the print head is not installed, the carriage returns

and locks in the home position.

When the Power button is pressed during printing, printing

stops, and the mode returns to step 4) above.

When the Power button is pressed during printing, printing

stops, and the mode returns to step 4) above.

Proceed to the following steps 5) and then 6) to set the

destination.

Cleans black and color, simultaneously.

Return to step 4) above.

Remarks