Aktakom AM-1016 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Мультиметр Aktakom AM-1016. Aktakom AM-1016 12 сторінок. Network multimeter

1. SAFETY INFORMATION

To ensure safe operation, and in order to exploit to the full

functionality of the meter, please follow the directions in this

section carefully.

This multimeter has been designed according to IEC-1010 concerning electronic measuring instruments

with an over voltage category CAT II 1000V, CAT III 600V and pollution2.

With proper use and care, the digital multimeter will give you years of satisfactory service.

Follow all safety and operating instructions to ensure that the meter is used safely and is kept in good

operating condition.

1.1 PRELIMINARY

1.1.1 When using the meter, the user must observe all normal safety rules concerning:

•

Protection against the danger of electrical attack

•

Protection of the meter against misuse

1.1.2 When the meter is delivered, check if it has been damaged in transit.

1.1.3 When harsh preservation or shipping conditions caused, inspect and confirm this meter without

delay.

1.1.4 Test leads must be in good condition. Before using, verify that the insulation on test leads is not

damaged and/or the leads wire is not exposed.

1.1.5 Full compliance with safety standards can be guaranteed only id used with test leads supplied. If

necessary, they must be replaced with the same model or the same class.

1.2.1 Never exceed the protection limit values indicated in specifications for each range of

measurement.

1.2.2 When the meter is linked to measurement circuit, do not touch unused terminals.

WARNING