Aktakom APS-7306 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Джерело живлення Aktakom APS-7306. Aktakom APS-7306 12 сторінок. Programmable dc power supply

REMOTE CONTROL VIA PC
Introduction
1.
The Aktakom Power Manager Express application is
designed to manage AKTAKOM APS-7306 power
supplies
2. Getting Started
2.1 Minimum computer requirements
Computer used for the device work should meet the following minimal
requirements:
- USB-port;
- Installed Windows 2000 or Windows XP operating systems;
- VGA video system (640*480 resolution, 256 colors), the
recommended resolution is
800*600 or more, 24-bit color;
2.2 Preparation for use
2.3.1 Hardware installation
To install the device it's necessary to:
Connect the device to the PC USB-port by "A-B" type cable subject to
the connection with the USB-port Switch on the PC
2.3.2 Software installation
Insert the media with the software distributive into the disk drive,
find setup program, run it and then follow the program installation
instruction.
After the installation process is completed there will be a program
group created with shortcuts for the program and for its Help. You
may start them using "Start" menu.
Before using the device it's necessary to install a USB interface
driver. All necessary files will be put into the program working
folder, System subfolder, at the software installation.
Silicon Labs Virtual COM Port (VCP) Universal Driver
The virtual COM port driver is installed automatically when you
install the application, but you can also install it manually later.
www.tmatlantic.com
8