Aktakom ATE-2509 Посібник з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Термометр Aktakom ATE-2509. Aktakom ATE-2509 11 сторінок. Dual laser plus type k thermometer

Друкувати сторінку

6) In MAX, MIN, DIF, AVG mode:

a. Press " Up Button " ( 3-4, Fig. 1 ) for LOCK mode

ON/OFF. The lock mode is particularly useful for

continuous monitoring of temperatures for up to 60

minutes.

b. Press " Down Button " ( 3-2, Fig. 1) for

transferred.

7) In all modes: First hold on the " Measure Button "

( 3-6, Fig. 1)

a. and press " Up Button " ( 3-4, Fig. 1) for backlight

function ON/OFF.

b. and press " Down Button " ( 3-2, Fig. 1) for laser

function ON/OFF. (With flash light be turned on in the

same time as laser )

5. MEASURING CONSIDERATION

5-1 LCD error message

The thermometer incorporates visual diagnostic

messages as follows

Hi' or 'Lo' is displayed when the

temperature being measured is outside of

the settings of HAL and LAL.

Er2' is displayed when the thermometer

is exposed to rapid changes in the

ambient temperature. 'Er3' is displayed

when the ambient temperature exceeds

(32 ) or +50

℃

℉

The thermometer should be allowed

plenty of time (minimum 30 minutes) to

stabilize to the working/room

temperature.

℃

℉

(122 ).

℃

℉