Aero-Spa Aero-pool Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Гідромасажна ванна Aero-Spa Aero-pool. Aero-Spa Aero-pool 13 сторінок.

Aero-Pool not running / No bubble from sintered diffuser

1. Verify unit is receiving power

a. Reset GFCI breaker.

b. Reset circuit breaker at house fuse panel.

2. Verify ozone tube is not broken, pinched, or disconnected

3. If these steps do not solve the problem call Aero-Spa, LLC

A condition typically associated with excess organic particulates from

1. Apply pool clarifier.

2. If not resolved within (4) days, contact Aero-Spa, LLC

Strong ozone odor near Aero-Pool generator

1. Verify ozone tube is not broken

2. Verify ozone tube is not pinched or disconnected

3. Unplug unit and call Aero-Spa, LLC

1. Reduce cycle run time by 25%. Repeat if odor remains strong

after 1 hour.

2. Unplug unit and call Aero-Spa, LLC

Ozone tube is cloudy in color and not flexible

This is normal, periodically check for cracks in ozone tube.

Replacement parts are available from Aero-Spa, LLC

1. This is normal when the water used to fill the pool has high

iron content. The diffuser can be soaked in "rust or stain

remover" or similar product and rinsed thoroughly after

soaking.

2. If these steps do not solve the problem call Aero-Spa, LLC

1. This is normal when the water used to fill the pool has high

iron content. Using "rust or stain remover" solution, wipe the

rust stain with damp sponge containing rust or stain remover.

Rinse sponge in solution periodically.

2. If these steps do not solve the problem call Aero-Spa, LLC

TROUBLESHOOTING

Water is cloudy

oils and soaps.

Strong ozone odor in pool

Sintered diffuser is turning brown

Brown ring at water line