Acer Aspire V7 Series Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Acer Aspire V7 Series. Acer Aspire V7 Series 20 сторінок.
Також для Acer Aspire V7 Series: Посібник користувача (28 сторінок), Посібник користувача (36 сторінок)
Друкувати сторінку
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1.
To clean the LCD monitor screen:
•
Turn off the LCD monitor and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5.
Store the LCD monitor in a room with a temperature of -20°C to 60°C (-4°F to 140°F). Storing the LCD monitor
outside this range may result in permanent damage.
6.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
•
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
•
The LCD monitor or case is damaged.
Attaching the monitor to the base
1.
Remove the monitor from the packaging.
2.
Attach the footstand to the base. (for selected models).
3.
Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4.
Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the DP (optional) and/or VGA (optional)
and/or HDMI (optional) input socket of the monitor, and the VGA
(optional) and/or DP (optional) and/or HDMI (optional) output socket
of the graphics card on the computer. Then tighten the thumbscrews
on the signal cable connector.
3.
Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4.
Insert the monitor power cable into the power port at the back of the
monitor.
5.
Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
External controls
1
Function key
2
Function key
3
Function key
4
Function key
5
Dc Power
1
2
3
4
5
User Define(Default is Modes Hot Key)
User Define(Default is Brightness)
Input Switch Hot Key
Main Menu Hot Key
Power on/off the monitor