Acer Aspire V7 Series Посібник користувача - Сторінка 24
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Acer Aspire V7 Series. Acer Aspire V7 Series 36 сторінок.
Також для Acer Aspire V7 Series: Посібник користувача (20 сторінок), Посібник користувача (28 сторінок)
Друкувати сторінку
2.
Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low
Blue Light, ACM,Super Sharpness,Auto Config,H. Position,V. Position,Focus and
Clock.
5.
Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
6.
Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Sets the degree of difference between light and dark areas.
7.
Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8.
Low Blue Light: Filters out Low Blue Light to protect your eyes by adjusting how much
Low Blue Light is shown -- 80%, 70%, 60%, or 50%.
9.
ACM: Turn ACM on or off.
Note: Set to "On", will be based on the current screen to dynamic contrast adjustment
10. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology
can simulate high-resolution images by boosting the pixel density of the original source
to make images sharper and clearer..
Color
Mode - Stamdard
Picture
Gamma
Color
Color Temp.
Audio
R Gain
Performance
G Gain
OSD
B Gain
System
R Bias
G Bias
B Bias
Move
Enter
Mode - Stamdard
Picture
Modes
Color
sRGB Mode
Audio
Grayscale Mode
Performance
6-axis Hue
OSD
6-axis Saturate
System
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
2.2
Warm
50
50
50
X
50
50
50
Off
Off
X
..