Aerobits OGS Технічний паспорт та інструкція користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Технічний паспорт та інструкція користувача для Мережеве обладнання Aerobits OGS. Aerobits OGS 13 сторінок. Omni-directional groundstation withble/wi-fi technology

Друкувати сторінку

Omni-directional Ground Station with BLE/Wi-Fi Technology

Datasheet

Inserting a SIM/chip card

4.3

Ground stations based on the HOD V2 need a valid SIM card. Recommended way to change/insert SIM card is

described below.

1. Disconnect module.

Ensure that you have HOD disconnected and take off module cover. To unmount cover you will need a cross

screwdriver.

2. Find SIM card slot and insert SIM card.

It is not recommended to unmount the HOD V2 because of very sensitive connections. The slot is visible after turning

the housing.

Insert SIM card into slot visible on the picture above. A simple way to do it is to grab SIM with tweezers and push it

carefully directly into slot. Then attach the device back (if unmounted) and mount the cover.

Date: 2022-12-20

Document ref: 23ob-v1.0.15

This document is subject to change without notice. For technical questions, contact:

[email protected]