American Sanders OBS-18 Інструкції з безпеки оператора - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкції з безпеки оператора для Шліфувальна машина American Sanders OBS-18. American Sanders OBS-18 7 сторінок. Clarke oscillating sander
Також для American Sanders OBS-18: Інструкція з експлуатації (2 сторінок)
Друкувати сторінку
ENGLISH
EN
Troubleshooting
Problem
Motor will not start.
Motor fails to start / runs
sluggish.
Fuse / Circuit Breaker repeatedly
trips.
-8-
Cause
No power.
Interlock not depressed.
Defective switch/ Bad connection
Low voltage from excessive length
or undersized extension cord.
Defective start capacitor.
Defective start switch.
Defective start/run capacitor
Defective motor low voltage
Low voltage.
Bad connection.
Defective motor.
Clarke
®
American Sanders
Action
Check power supply and connection
Depress Interlock before activating
control lever.
Contact an authorized Clarke
American Sanders Dealer.
Use a 14 Ga extension cord, not to
exceed 50' length.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.
Eliminate extension cord.
Locate power source closer to
work site. Have voltage checked by
a qualifed electrician.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.
Operator's Manual (EN) - OBS-18/18DC