Bobrick B-38030 Інструкція з монтажу та обслуговування - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу та обслуговування для Диспенсер Bobrick B-38030. Bobrick B-38030 6 сторінок.
Також для Bobrick B-38030: Інструкція з монтажу та обслуговування (9 сторінок)
Друкувати сторінкуINSTALLATION OF CABINET:
B-38030 115V: 115V, 8.0 Amp, 920 Watts, 50/60 Hz, Single Phase, cUL Listed.
B-38030 230V: 208–240V, 3.6-4.4 Amp, 750-1050 Watts, 50/60 Hz, Single Phase, CE Marked, cUL Listed.
Provide framed rough wall opening 362mm (14-1/4") wide x 1412mm (55-9/16") high. Minimum recessed depth required
to finish face of wall is 100mm (4"). Allow clearance for construction features that may protrude into rough wall opening
from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents and conduits. If unit projects above top of
wainscot, provide channel or other filler to eliminate gap between cabinet flange and finish face of wall. Mount unit in wall
opening with shims between framing and cabinet at all points indicated by an "S" in Figure 1, then secure unit with 4.2 x
32mm (#8 x 1-1/4") sheet-metal screws (not furnished). Provide electrical service from nearest distribution panel to dryer
mounting base in conformance with local electrical codes
Figure 1
.88"
22mm
Diameter
Hole for
Between-Wall
Wiring
Dryer
Sensor
57-1/16"
1449mm
Dryer
Outlets
Lock
& Key
Removable
Waste Bin
Form No. 38030-369 Issued 7/29/21
15-5/8"
Finish Face of Wall
396mm
8-5/8"
219mm
S
S
11-1/2"
292mm
5-1/4"
133mm
Between-Wall
Paper
Towel
Dispenser
28-9/16"
751mm
8-5/8"
S
S
219mm
13-7/16"
342mm
Finish Face of Floor
1-7/8"
48mm
5/8"
S
16mm
8"
3-7/16"
203mm
87mm
.88"
22mm
Diameter
Hole for
Wiring
55-1/16"
1399mm
16"
406mm
5/8"
16mm
1-7/8"
48mm
S
3-15/16"
100mm
© 2021 by Bobrick Washroom Equipment, Inc.
Printed in U.S.A.