BobsCNC KL733 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Принтер BobsCNC KL733. BobsCNC KL733 18 сторінок. X frame assembly
Також для BobsCNC KL733: Посібник з монтажу (12 сторінок), Посібник для початківців (9 сторінок), Збірка (20 сторінок)
Друкувати сторінку
The KL7 Series does not include a Spoilboard. You will need to build one.
We recommend you consider the following questions to help determine
the best Spoilboard configuration for your needs. We also have includ-
ed some ideas that may be helpful.
How large is my work?
With large projects, you may want to only have clamping at the edges.
•
With small projects, you may need flexibility with clamping.
•
How tall is my project?
With tall projects, you may want a thinner Spoilboard
•
A thinner Spoilboard will have more flex
•
We would recommend a 0.5" to 1.0" thick baseboard and Spoilboard.
•
What clamping system do I plan on using?
Double sided tape
•
Threaded inserts
•
T-slots
•
Vacuum table
•
Recommended Spoilboard installation will require:
1.
16
5/16-18 x 1.5" screws and nuts
2.
4
Runner boards 3/4 x 1 x 3 pine boards 40" long
3.
1
Baseboard 1/2 to 1" plywood (36.5" x 49.5")
4.
1
Spoilboard material finish size (36.5" x 49.5")
Other needed material may include: Inserts, T-track, or glue depending
on your requirements for material clamping.
Page 4