Euro-Pro Bagless Stick Shark EP601 HEPA Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос Euro-Pro Bagless Stick Shark EP601 HEPA. Euro-Pro Bagless Stick Shark EP601 HEPA 20 сторінок. Bagless stick, hepa, 120v ~, 60hz., 8.3 amps
Друкувати сторінку
Warning: Alwaysunplugthe unit from
electricaloutlet beforeopeningthe Dust
Cup (container),
• Holdthe dust cup in your hand.
, Turn it a complete90° in the direction
shown in drawing#t (Turninglessthan
90° will causethe dust cup to be
attachedon itsbottom.)
• Let the dust cup comedown slightlyas
shown in drawing#2
° Slidethe dust cupout towardsyou (see
arrowin drawing#3).
, Holdthe dust cup in your handand
removethe HEPAdust cup filter (see
drawing#4).
o Emptythe dust cup (seedrawing#5)
Cleaninq
& Chanqin_q
the HEPA
Dust Cup Filter
,
After you have emptied
the dust from
the Dust Cup (container),
separate
the debris
screen from the HEPA filter
cartridge
by grasping
the debris
screen with one hand and the filter
frame with the other and pull apart.
Debris Screen
HEPA Filter
2.
Rinse the debris screen
under the
faucet until clean, Allow to air dry or
dry with a clean dish towel
Do NOT
wash in dishwasher.
3.
To clean the HEPA filter cartridge,
hold filter by frame flange and tap
filter on the inside wall of a dust
container
(garbage
can)
•
+
":d_>L
NOTE:
Always
turn off the power switch
and unplugthe
electrical
cord before
emptying
the Dust Cup.
Ensure that you do not damage
the
pleated
filter material
during cleaning.
Also note that discoloration
occurs
during
use.. This does NOT affect the
filter's
performance.
4_ Reassemble
the debris
screen to the
HEPA filter cartridge
and replace
into
dust cup (container).
Ensure that the
filter assembly
is completely
seated
inside the dust cup (container).
5.
Attach the dust cup (container)
to the
vacuum.
Important:
Do NOT use the HEPA filter
cartridge
without
the debris screen
in
place.
Warning:
Always
empty
the dust cup and clean the HEPA dust cup filter before
each use and during prolonged
usage. Never over flit the dust cup - remove
dirt and
clean the HEPA dust cup filter during prolonged
usage or risk motor damage
Make
sure
that the debris
screen
is completely
dry before
reassembling
the HEPA
Filter.
6