Canon AE-1 Посібник з інсталяції Посібник з інсталяції - Сторінка 32

Переглянути онлайн або завантажити pdf Посібник з інсталяції Посібник з інсталяції для Цифрова камера Canon AE-1. Canon AE-1 48 сторінок.
Також для Canon AE-1: Початок роботи (2 сторінок), Інструкція з експлуатації (22 сторінок), Посібник (42 сторінок), Посібник (12 сторінок), Інструкція з експлуатації (22 сторінок)

Adjusting the Height

1) Loosen the two fixing screws [ l ] each on the front

and rear casters on the pickup side of the finisher.

2) To increase the height of the finisher and the punch-

er unit, turn the adjusting bolt [2] in the direction of

the arrow A (A full turn of the adjusting bolt will in-

crease the height of the finisher by 1.75

mm.).

Refer

to the index while turning the bolt, and perform this

for both front and rear casters.

3) To decrease the height of the finisher and the

puncher unit, turn the adjusting bolt [2] in the direc-

tion of the arrow B (A full turn of the adjusting bolt

will decrease the height of the finisher by 1.75

rnrn.). Refer to the index while turning the bolt, and

perform this for both front and rear casters.

Adjusting the Tilt

1) Loosen the two fixing screws [I] each on the front

and rear casters on the delivery side of the finisher.

2) To decrease the gap between the punch unit and the

host machine, turn the adjusting bolt

[2]

in the di-

rection of the arrow A (A 111 turn of the adjusting

bolt will increase the height of the finisher by 1.75

mm.). Refer to the index on the caster while turning

the bolt, and perform this for both front and rear

casters.

3) To increase the gap between the puncher unit and

the host machine,

t u r n

the adjusting bolt [2] in the

direction of the arrow B (A full turn of the adjusting

bolt will decrease the height of the finisher by 1.75

mm.). Refer to the index on the caster while turning

the bolt, and perform this for both front and rear

casters.