Akurat lighting SECTOR Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Освітлювальне обладнання Akurat lighting SECTOR. Akurat lighting SECTOR 6 сторінок.
Друкувати сторінкуSECTOR 4 Panel Grip
2.
This grip allows you to connect four SECTOR LED modules, attach the SECTOR controller and mains adapter, or V-Lock Power Plate for SECTOR, to create an LED panel and attach it to a standard lighting
tripod.
Photo 2 shows a Panel 4X SECTOR assembled using this grip.
The LED sectors are attached to the grip by means of sliders with pins (1), locked with knobs (2).
Advanced two-sided Velcro fasteners were used to attach the power supply and the controller (the position of the Velcro fasteners is shown in Figure 3). Additionally, these components are secured against
accidental disconnection with Velcro straps (4). This method of fastening enables very quick assembly or disassembly of individual components. To dismantle the power supply or controller, disconnect the
Velcro straps and use the tearing force to disconnect the component from the grip. Reassembling requires entering Velcro fasteners on components in their counterparts on the grip, pressing the component
down and securing it with a Velcro strap.
The grip is equipped with a mandrel (5) and a grip head (6) which allows it to be attached to a tripod and the panel to be positioned in any plane and at any angle. It is also equipped with a handle (7) to make
it easy to set up and move the panel.
2
1
2
1
4
2
1
2
1
3
6
3
7
3
4
5
3
Photo 2
Panel 4X SECTOR
2
1
3
2
1
4
2
1
2
1
3
S E C T O R