Baroness GM2800 Технічна інформація - Сторінка 2

Переглянути онлайн або завантажити pdf Технічна інформація для Газонокосарка Baroness GM2800. Baroness GM2800 6 сторінок. Height of cut adjustment

Preparation

Height of Cut Range

It is much easier to adjust the two

rear units by swinging them out. In

order to make this easier ensure

that the removable pin is kept clean

and greased. Periodic wire brushing

of this pin prior to greasing will ease

the removal of these pins. You will

also find it easier to remove the pins

and swing out the rear units if the

machine is parked level ground.

The Baroness GM2800 has four

height of cut ranges as indicated on

the decal which is located to the left

of the operators seat. Each range is

selected by changing the height

adjustment brackets . The position

of the bracket retaining bolts

stipulates the range selection as

indicated at the top of the decal.

For example, the column shown

second from the left will allow

heights of cuts from 30mm to

66mm. This is selected by lining up

the bolt holes 'top right and middle

left', as indicated by the solid white

dots which signifies bolt positions.

This second column range is the