d2itsu APD-12CR Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Кондиціонер d2itsu APD-12CR. d2itsu APD-12CR 20 сторінок.

INSTALLATION INSTRUCTIONS (optional)

Window

panel

Foam seal

Installation in a sliding sash window

1. Cut the foam seal(adhesive type) to the

proper length and

attach it to the window frame. See Fig.12.

Foam seal A

(adhesive type)

2. Attach the window slider kit to the window

stool. Adjust the length of the window slider kit

according to the width of window, shorten the

adjustable window kit if the width of window is

less than 26.5 inches.

Open the window sash and place the window

Fig. 12

slider kit on the window stool. See Fig.13.

3. Cut the foam seal(adhesive type) to the

proper length and attach it on the top of the

window. Shown as in Fig.14.

4. Close the sliding sash securely against the

window.

5. Cut the foam seal to an appropriate length

and sea the open gap between the top window

sash and outer window sash. Shown as in

Fig.15.

Fig. 13

NOTE: All the illustrations in this manual are

for explanation purpose only.Your unit may be

slightly different. The actual shape shall prevail.

Fig. 14

Fig. 15