Domyos VE 680 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Велотренажер Domyos VE 680. Domyos VE 680 10 сторінок.

WARNING : you must get off the elliptical bike to adjust the level

of the product.

In the event that the bike becomes unstable during use, turn one or both of the

level adjusters until the bike is stable.

According to the EN (European Norm) deﬁ nition, this product is an item of

"pedal crank training equipment".

You can adjust the braking torque not only with your pedalling speed but

also by manually choosing your resistance level (by turning the torque control

knob on non-motorised products and by pressing the +/- buttons on motorised

products).

However, if you retain the same level of resistance, the braking torque will

increase/decrease as your pedalling speed increases and decreases.

SAFE ACCESS

Ensure that it is safe to climb on and off the product by locking the handles and

pedals with the thumb wheel.

ADJUSTING THE POSITION OF THE PEDALS

You can adjust the position of the pedals during assembly.

You have three adjustment positions:

Forward: closest to the handlebar.

Centre.

Rear: furthest from the handlebar.

The optimal set position is the central position.

However, in order to boost performance and best adapt

to your body shape, this setting will optimise your position on the elliptical bike.

The forward position will perfectly suit people under 175cm in

height and the rear position will particularly suit people over 185cm in height.

WARNING : You must get off the elliptical bike to move it in any way.

Standing on the ﬂ oor in front of your product, hold the handlebars and pull the bike towards you. The product is then resting on the castors

and you can move it. When you have ﬁ nished moving it, move down to the ﬂ oor with the rear legs.

Use a soft cloth to remove dust.

Persistent stains (like sweat) can be removed with a slightly damp cloth.

E N G L I S H

ADJU S T M EN T S

LEVELLING THE BICYCLE

ADJUSTING THE RESISTANCE

M O V IN G T H E PR OD U C T

M A IN T EN A N C E