American Standard Town Square Whirlpool and Bathing Pool 2742.002 Особливості та розміри - Сторінка 2
Переглянути онлайн або завантажити pdf Особливості та розміри для Ванни American Standard Town Square Whirlpool and Bathing Pool 2742.002. American Standard Town Square Whirlpool and Bathing Pool 2742.002 2 сторінки. 6' x 42" whirlpool and bathing pool
Друкувати сторінку
4"
(102mm)
35-3/4"
13-1/4"
(908mm)
(337mm)
C/L OF DRAIN OUTLET
41-3/4"
26-3/4
(1060mm)
(679mm)
3/4"
(19mm)
OUTLINE OF
SUCTION
SKID RESISTANT
SURFACE
SAFE-T-
HEATER
REMOVABLE
BLANK
2"
(51mm)
PUMP
INTEGRAL
FEET
SUPPORT
1-1/2" N.P.T. THREADS
1-1/2" O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2742 WHIRLPOOL
INSTALLED SIZE
71-1/2 x 41-3/4 x 22 In. (1816 x 1060 x 559mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
WHIRLPOOL PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF
BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM
PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA
Certified. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
71-1/2"
(1816mm)
3"
INTEGRAL
(76mm)
FITTING DECK
2-1/4" X 14"
(57 X 356mm)
EDGE OF
FLOOR
CUTOUT
PROVIDE ACCESS
FLOOR CUTOUT
TO PUMP FOR
5" X 15"
SERVICE ON ALL
(127 X 381mm)
INSTALLATIONS
PUMP
ON/OFF
SWITCH
OUTLINE OF CUTOUT
JETS (8)
70" X 40-1/4"
(1778 X 1022mm)
LEVELING STRINGER
C/L OF
(NOT FOR SUPPORT)
OVERFLOW
22"
3-1/4"
(559mm)
(83mm)
20"
ROUGH
(508mm)
FLOOR
3"
5/8"
(76mm)
(16mm)
115 Lbs. (52 Kg.)
690 Lbs. (313 Kg.)
69 Gal. (261 L)
60 Gal. (227 L)
41 x 21-1/2 In. (1041 x 546mm)
62 x 31-1/2 In. (1574 x 800mm)
14-1/4 In. (362mm)
33 Lbs./Sq.Ft. (163 Kgs./Sq.m)
27.8
55.7
2.1 HP, 14.4 AMPS ,120V.
TOWN SQUARE
WHIRLPOOL AND BATHING POOL
4"
(102mm)
35-3/4"
(908mm)
13-1/4"
(337mm)
C/L OF DRAIN OUTLET
41-3/4"
26-3/4
(1060mm)
(679mm)
3/4"
(19mm)
2"
(51mm)
INTEGRAL
FEET
SUPPORT
1-1/2" N.P.T. THREADS
1-1/2" O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2742 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
H22
6' x 42"
®
HIGH GLOSS
71-1/2"
(1816mm)
INTEGRAL
(76mm)
FITTING DECK
2-1/4" X 14"
(57 X 356mm)
FLOOR CUTOUT
5" X 15"
(127 X 381mm)
OUTLINE OF
OUTLINE OF CUTOUT
SKID RESISTANT
70" X 40-1/4"
SURFACE
(1778 X 1022mm)
LEVELING STRINGER
C/L OF
(NOT FOR SUPPORT)
OVERFLOW
3-1/4"
(559mm)
(83mm)
20"
ROUGH
(508mm)
FLOOR
3"
5/8"
(76mm)
(16mm)
71-1/2 x 41-3/4 x 22 In.
(1816 x 1060 x 559mm)
115 Lbs. (52 Kg.)
690 Lbs. (313 Kg.)
41 x 21-1/2 In. (1041 x 546mm)
62 x 31-1/2 In. (1574 x 800mm)
14-1/4 In. (362mm)
33 Lbs./Sq.Ft. (163 Kgs./Sq.m)
3"
EDGE OF
FLOOR
CUTOUT
22"
27.8
55.7
Rev. 2/08