Da-Lite IDEA Panoramic Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Проекційний екран Da-Lite IDEA Panoramic. Da-Lite IDEA Panoramic 8 сторінок.
Також для Da-Lite IDEA Panoramic: Інструкція з експлуатації (12 сторінок), Інструкція з експлуатації (12 сторінок)

Друкувати сторінку

Wall Mounting

Refer to the Hardware Provided section on page 2 for the lengths

of wall brackets included with your screen size.

Secure wall brackets at the desired height. Each bracket must be

mounted to a flat surface into at least two wall studs. Brackets

must be level to each other. Center the middle bracket with the

middle panel. Place the side brackets 5" from the side edge of the

screen frame. The middle panel will use a 44" bracket and the

side panels will use 28" or 44" brackets depending on screen size

(Figure 3).

Note: You will need at least 1" clearance above the brackets holes

in order to mount the screen.

2. Lift the screen at least 1" over the wall brackets. Lower the screen

until the frame hooks onto the wall brackets.

Note: This step will require three people. Each end of the screen,

as well as the center, must be supported when lifting onto the

wall brackets.

3. Attach bottom of screen to wall with (2) #8 x 1 1/2" screws per

panel. The bottom mounting holes are located under the trays

(Figure 3).

Bracket Screws

(Not Supplied)

Cleaning

The supplied cleaning cloth can be used to clean marks on the

screen surface made by everyday dry erase marker usage. To

clean persistent marks from dry erase markers, use the supplied

Da-Lite spray cleaner and cleaning cloth. To clean permanent

markers and other unintentional marks on the surface, use the

supplied Da-Lite spray cleaner and cleaning cloth or a melamine

foam cleaning pad.

Wall Brackets

Figure 3

(6) #8x1 1/2" Screws