Da-Lite IDEA Screen Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Проекційний екран Da-Lite IDEA Screen. Da-Lite IDEA Screen 8 сторінок. For epson brightlink displays (16:9)
Також для Da-Lite IDEA Screen: Інструкція з експлуатації (12 сторінок), Інструкція (2 сторінок), Інструкція з експлуатації (16 сторінок)
Друкувати сторінку
Wall Mounting Instructions for Screens with 24" Marker Tray
NOTE: The screen is shipped with two wall brackets. Screens in
widths of 84 ¾" and below receive (2) 28" wall brackets. Screens
above 84 ¾" in width receive (2) 44" wall brackets. Use
appropriate mounting hardware for the wall type and to
accommodate for the screen's hanging weight (Figure 2).
1.
Secure the two wall brackets to wall studs at the desired height.
The outside edge of each wall bracket must be no greater than
5" away from the left and right edges of the frame. You will need
at least 1" clearance above the drilled holes to hang the screen
(Figure 2) .
No More
than 5"
4
2. To install the (2) L-brackets, you must measure the overall height
of the screen frame and subtract 1⅛". Using that dimension,
measure down from the top edge of the wall brackets and mark
the wall for two screw holes. The outside edge of each L-bracket
must be no greater than 5" away from the left and right edges of
the screen frame (Figure 2).
3. Secure the two L-brackets to the wall at the marked locations. The
longest side of the two L-brackets should be pointing upwards
when secured in order to hide the L-brackets behind the screen
frame once the screen is installed.
Wall Brackets
Screws (Not Supplied)
Figure 2
No More
than 5"
L-Bracket
No More
than 5"